TP-LINK Archer C1200 price, specs, review 價錢、規格及用家意見

TP-LINK Archer C1200 Hong Kong
From HK$ 1,478.00
From 1 seller at Zalora Seller is referred to as item providers listed on various e-commerce/shopping platforms.
Compare 1 offer
Product Type

Wireless Router

Transfer Rate




Number of Antennas


Full Specs

Compare Prices of TP-LINK Archer C1200

Go to Store

Cheapest TP-LINK Archer C1200 Price in Hong Kong is HK$ 1,478.00

The TP-LINK Archer C1200 is now available in Hong Kong. The cheapest TP-LINK Archer C1200 price in Hong Kong is HK$ 1,478.00 from Zalora. TP-LINK Archer C1200 price details are updated August 2021.

TP-LINK Archer C1200 Price Guide

Price List by Country for TP-LINK Archer C1200

Country International Price Price in HKD
Hong Kong HKD 1,478.00 HK$ 1,478.00
Thailand THB 1,750 HK$ 409.00

TP-LINK Archer C1200 Specs

Technical Details
Product Type Wireless Router
Release Year 2017
Wi-Fi Properties
Transfer Rate 300Mbps
Wi-Fi Frequency Band Dual Band
Wi-Fi Standard
802.11ac Yes
802.11b No
802.11ad No
802.11n Yes
802.11a Yes
802.11g Yes
Number of Antennas 3
USB 3.0 No
USB 2.0 1
LAN Interfaces
Number of LAN Ports 4
SFP Port Yes
SFP+ Port Yes
RJ-45 Port Yes
WPA2 Yes
128-Bit WEP Yes
64-Bit WEP Yes
Internet Security
Prevent DOS Yes
Child Lock Yes
Access Control Policies Yes
Firewall Yes
Flash Memory 16MB
Weight 1045g
Dimensions (W x H x D) 243 x 160.6 x 32.5mm
Physical Buttons
Reset Button Yes
WPS Button Yes
WLAN Button No
Power Button Yes
Retail Price 964.13

TP-Link Archer AC1200 Router Review and Specs Hong Kong

The TP-Link Archer is a dual-band gigabit router that’s designed to provide some nice upgrades and features at a budget-friendly price. It includes features like dual 2.4GHz and 5GHz bands, and MU-MIMO beamforming, marking it out as a great upgrade for anyone using a budget router that’s more than a few years old. It does lack some features you can get out of a slightly higher priced budget unit, but the overall balance of feature set to price is attractive.

Design: Improved over Older Designs

Instead of the flat or glossy back finish seen on most routers, this has a two-tone crosshatched pattern that creates an interesting visual effect. The edges are rounded instead of angular, and the top actually curved gently downward when viewed head-on. The A6 features four antennas, two on the back, and the other two on the sides. They rotate easily for better positioning, but they aren’t removable. That’s a bit of a knock on this unit, as the ability to remove and replace antennas is pretty standard even in budget devices.

The ports and power button are all found on the back of the unit in a fairly standard array, and you’ll find the indicator LEDs on top near the front edge. The positioning is good for desktop use, and it also leaves the indicators clearly visible when wall mounted.

Setup Process: Completely Painless

The router comes fully assembled, which makes it a bit easier and faster to set up than most. Getting the router up and running was literally a matter of plugging in the Ethernet cables, powering it up, and logging into the web interface.

Connectivity: Dual-band with MU-MIMO

The TP-Link Archer A6 is an AC1200 dual-band router that supports MU-MIMO beamforming. The total throughput is a little on the light side if you have a lot of devices, but MU-MIMO is a nice feature to see in such an affordable unit. On the physical side, the A6 comes with a bare minimum single WAN port and four LAN ports. It doesn’t come with a single USB port, so you can’t use this router to host a networked USB drive. That isn’t completely unexpected from a budget router, but it would have been nice if it included at least one USB port.

Software: Basic and Easy to Use

The Archer A6 uses the same familiar web interface TP-Link has used for years. If you’ve ever used a TP-Link router before, you’ll already be familiar with the system. If you haven’t, it’s very easy to pick up. The interface is laid out in two tabs, basic and advanced, with an optional quick setup. Click the quick setup, and it will run you through all the basics to get the router up and running, set up both wireless networks and basic settings that work well enough for most people.

The basic tab provides you with the most important information, like the status of your internet connection and Wi-Fi networks, and how many devices are currently connected. You can easily access internet settings, wireless settings, parental controls, and fire up the guest network if you need it.

The advanced tab digs down into settings like parental controls, where you can set profiles to block access to certain content and create time limits, the firewall, and NAT forwarding. In addition to the web interface, TP-Link also offers a phone app that lets you change basic settings. Advanced settings have to be accessed through the web portal.

How do I update the firmware on my Archer C1200?

Here’s the step by step guide to update Link Archer C1200 firmware:

  1. Type in the address bar after you log into the TP-Link device. The default password and username are both admin.
  2. Go to Advanced > System Tools > Firmware Upgrade > and then click the browser button to choose the firmware you took from the folder.
  3. Next, all you have to do is click on the upgrade button and the device will restart automatically on the update is completed. Kindly wait for a few minutes.
  4. Check if the router’s firmware has been updated.
  5. Check the hardware version of TP-Link device.
  6. From the management page, log into the device and to go Advanced > System Tools > Firmware Update, both the software and hardware versions will appear on the screen.